What do the Bird, Chase and Static camera modes do?
Bird follows the route from above and always faces the same way. Angle sets that direction and Pitch tilts the view.
Chase follows the route and turns with it, like a drive-along view. Angle sets where it rides: Back follows behind, Left and Right ride alongside, Front looks back at the route. Pitch tilts it.
Static keeps the whole route in view. Only the route, the labels and your photos move. Angle sets the way it faces and Pitch tilts the view.
Should I use Dynamic or Fixed zoom?
Zoom mode, in Camera, sets how Bird and Chase zoom as they travel. Static keeps one view, so it has no Zoom mode.
Dynamic suits a trip whose distances vary a lot, like a few stops around one town and then a long drive to the next. The camera zooms in close around stops that are near each other and pulls out for the long legs.
Fixed suits a trip whose stops are all about as far apart, like a walk through one city. The camera stays at your first stop's zoom all the way through, so the Reel looks steadier.
Zoom under the preview still brings the camera closer or pulls it back in both modes.
How do I make my Reel open by zooming in from the planet?
In Camera, open Intro & outro and slide Zoom all the way to Planet. The Reel opens on the globe and zooms down to your first stop, and the outro zooms back out. Pitch and Angle there set the opening view. These don't apply to the Static camera, which keeps the whole route in view.
How do I bring the Reel's camera closer to the map?
Under the preview, slide Zoom to the right to bring the camera closer, or to the left to pull it back. It changes how close the camera flies to the route throughout the Reel.
Why can't I see 3D buildings in my Reel?
3D buildings are part of Premium and aren't available on satellite maps. They only appear when the camera is close to the streets. If your stops are far apart, the map stays high to fit the route, so slide Zoom under the preview to bring the camera closer, and raise Pitch in Camera to tilt the view so the buildings stand out. They show best on walks and city routes.
How do I get the best fog in my Reel?
Fog is part of Premium: turn it on in Map. It gathers towards the horizon, so it shows best when the camera looks across the land rather than straight down. Raise Pitch in Camera to tilt the view and the fog builds up in the distance.
How do I change my Reel's map style?
Open Map and pick a look: Standard, Vintage, Travellar, 8-bit, Neon, Blueprint, Nature, Satellite or Satellite Roads. Standard is free; the rest are Premium. Time of day (dawn, day, dusk, night), fog and 3D buildings are Premium too. Hiding the map's labels is free. Every style shows the terrain's relief.
How do I choose how to travel between stops?
Tap the transport icon between two stops, in Places in the Reel editor or in the activity's places:
Walking, Cycling, Driving: the route follows paths, cycle routes or roads for that leg.
Plane: an arc between the two places, drawn like a flight path.
Curve: a smooth line between the stops, for a boat, a train, or when no road fits.
Straight: a straight line between the two stops.
Each leg can have its own transport. When you import, Travellar sets legs of 1,000 km or more to Plane, and legs of 300 km or more with no road between them.
How do I rename a stop in my Reel?
In the Reel editor, open Places and tap the stop's name to change it. The new name shows straight away in the preview and in the video you export. If you're editing your activity (edit mode on), tap Save changes to keep it on the activity too; otherwise it only changes this Reel.
How do I add a place I found in Google Maps to the Reel I'm making?
On iPhone, keep your Reel open in Travellar. In Google Maps, open the place, tap Share and choose Travellar: it's added to your Reel as a new stop instead of starting a new one. Then press and hold it in Places to drag it where it belongs.
How do I reorder or remove stops in my Reel, or move a photo to another stop?
Open Places in the Reel editor. Press and hold a stop to drag it, and use its Menu to remove it. To move a photo to another stop, open Media and drag it there. If you're editing your activity (edit mode on), tap Save changes to keep them on the activity too; otherwise they only change this Reel.
Do changes in the Reel editor change my activity?
It depends on edit mode. With edit mode on (while you create an activity, or tap Edit on one of yours), changes in the Reel editor's Places and Media, like renaming or reordering stops, moving photos or muting a clip, are saved to the activity when you tap Save changes. They show on the activity and in every Reel you make from it. With edit mode off, they only apply to this Reel and are dropped when you close the Reel editor.
How do I choose which part of a photo or video shows in my Reel?
In the Reel editor, open Media, tap the photo or video and choose Frame. The rectangle has your Reel's shape: drag it over the part you want to keep, then tap Done. The Reel keeps that part in frame, and a photo's zoom-in centres on it.
If Photo fit or Video fit shows it whole in your Reel's shape, the rectangle covers all of it, as nothing is cropped.
How do I change how photos appear at each stop (Gallery or Polaroid)?
In Media, Photo style sets how photos appear at each stop. Gallery shows them full screen, one after another. Polaroid drops them as a stack of prints over the map. Place name and Captions add the stop's name and your caption to each photo.
How do I mute a video clip in my Reel?
One video: open Media, tap the video and choose Mute in the Reel.
All videos: turn on Mute videos in Media.
Hear the music under your videos: raise Music volume during videos.
Muting only affects the Reel, never the video itself.
How do I change my Reel's music?
Open Music and pick a track, Your music or None. Music is off in the preview until you tap the Sound button. When a video has sound, the music drops under it.
Yes, with Premium. Open Music and tap Your music, then pick a song from your files: on iPhone, the Files app. To use another one, tap the swap button on it.
What plays: the first 2 minutes of the song, from the start, on a loop if the Reel is longer.
Which songs: any audio file your browser or iPhone can play, up to 6 minutes and 40 MB. Songs from Apple Music or Spotify can't be used: they're protected, so they can't go into a video you download.
Where it's kept: only on the device you picked it on, never uploaded. On another device, the Reel switches to None until you pick the song there.
Use songs you have the rights to: Instagram and TikTok may mute a copyrighted song, or use one of their own sounds and set the music to None.
How do I change the stop names, markers and route line on the map?
Open Route in the Reel editor. To rename a stop, open Places and tap its name.
Labels: the stop names on the map, on or off, small, medium or large, and how long each shows.
Spots: the mark at each stop (dot, circle, ring, halo or glow), its size and colour, and whether it appears when the route reaches it or is there from the start.
Route: the line's colour, thickness and outline, and whether it's drawn as you travel or shown whole from the start.
How do I make my Reel spend longer at a stop or between stops?
Each time is next to what it times. In Places, the slider under the transport between two stops sets the travel time between them. Time per photo in Media sets how long each photo stays, Time per label in Route how long each stop's name shows, and Intro length and Outro length in Camera the start and the end.
How do I choose my Reel's shape and resolution?
Open Format. Choose vertical for Instagram Reels and TikTok, horizontal for YouTube, and 16:9, 3:2 or 1:1. 720p and 1080p are free; higher resolutions and 60 fps are Premium, up to 1440p on a computer and 1080p on iPhone.